Chamfer Router Bit 2615T618JAChamfer Router Bit 2615T618JA
|
 |
Dremel Trio™ Chamfer Router Bit For Routing In Wood And Other Soft Materials.decidated Accessory For Use With Dremel Trio Only.shank Diameter: 4,8 Mm Working Diameter: 9,5 Mm Quantity: 1 ... More Info | |
Corner Rounding Router Bit 2615T615JACorner Rounding Router Bit 2615T615JA
|
 |
Dremel Trio™ Corner Rounding Routing Bit For Routing In Wood And Other Soft Materials.decidated Accessory For Use With Dremel Trio Only.shank Diameter: 4,8 Mm Working Diameter: 9,5 Mm Quantity: 1 ... More Info | |
Detail Abrasive Brush 120 Grit 2615S472JADetail Abrasive Brush 120 Grit 2615S472JA
|
 |
The Detail Abrasive Brushes Have Very Flexible Bristles Which Allow Removal Of The Exterior “surface Layer” Without Damaging The Base Layer Below. These Brushes Can Be Used For Deburring, Cleaning, Finishing, And Polishing Of Detailed Parts, Tiny Areas And Irregular Places.working Diameter: 25 Mm Me... More Info | |
Detail Abrasive Brush 220 Grit 2615S471JADetail Abrasive Brush 220 Grit 2615S471JA
|
 |
The Detail Abrasive Brushes Have Very Flexible Bristles Which Allow Removal Of The Exterior “surface Layer” Without Damaging The Base Layer Below. These Brushes Can Be Used For Deburring, Cleaning, Finishing, And Polishing Of Detailed Parts, Tiny Areas And Irregular Places.working Diameter: 25 Mm Fi... More Info | |
Detail Abrasive Brush 220 Grit 2615S473JADetail Abrasive Brush 220 Grit 2615S473JA
|
 |
The Detail Abrasive Brushes Have Very Flexible Bristles Which Allow Removal Of The Exterior “surface Layer” Without Damaging The Base Layer Below. These Brushes Can Be Used For Deburring, Cleaning, Finishing, And Polishing Of Detailed Parts, Tiny Areas And Irregular Places.working Diameter: 25 Mm Fi... More Info | |
Detail Abrasive Brush 36 Grit 2615S1JA47Detail Abrasive Brush 36 Grit 2615S1JA47
|
|
The Detail Abrasive Brushes Have Very Flexible Bristles Which Allow Removal Of The Exterior “surface Layer” Without Damaging The Base Layer Below. These Brushes Can Be Used For Deburring, Cleaning, Finishing, And Polishing Of Detailed Parts, Tiny Areas And Irregular Places.working Diameter: 25 Mm Co... More Info | |
Dremel 0.8 mm Engraver MultipackDremel 0.8 mm Engraver Multipack
|
 |
Quality Cutters For Detail Engraving, Carving, Routing In Wood, Fiberglass, Plastic And Soft Metals.
Technical Data
Shank Diameter:
2,4 Mm
Working Diameter:
0,8 Mm
Maximum Rpm:
35.000 1/min
No. In Pack
3pcs... More Info | |
Dremel 1.6 mm Engraver MultipackDremel 1.6 mm Engraver Multipack
|
 |
Quality Cutters For Detail Engraving, Carving, Routing In Wood, Fiberglass, Plastic And Soft Metals.
Technical Data
Shank Diameter:
2,4 Mm
Working Diameter:
1,6 mm
Maximum Rpm:
35.000 1/min
No. In Pack
3pcs... More Info | |
Dremel 13 mm, Course 60 GritDremel 13 mm, Course 60 Grit
|
 |
For Rough Shaping And Smoothing Wood And Fiberglass, Removing Rust From Metal Surfaces And Shaping Rubber Surfaces. Sanding Bands Are Easily Replaceable.
Technical Data
Shank Diameter
3,2 Mm
Working Diameter
13,0 Mm
Grit
60
Maximum Rpm
35.000 1/min... More Info | |
Dremel 13.0 mm Cup Shape S/Steel BrushDremel 13.0 mm Cup Shape S/Steel Brush
|
 |
Stainless Steel Brushes Do Not Cause “after Rust” When Used On Corrosive-resistant Materials Like Pewter, Aluminum And Stainless Steel.
Technical Data
Shank Diameter
3,2 Mm
Working Diameter
13,0 Mm
Maximum Rpm
15.000 1/min... More Info | |
Dremel 13.0 mm Cup Shape Steel BrushDremel 13.0 mm Cup Shape Steel Brush
|
 |
Versatile Brush For Removing Rust And Corrosion, Polish Metal Surfaces, Deburr And Blend Surface Junctures Or Clean Electrical Components.
Technical Data
Shank Diameter
3,2 Mm
Working Diameter
13,0 Mm
Maximum Rpm
15.000 1/min... More Info | |
Dremel 13.0 mm Felt Wheel (Use 401)Dremel 13.0 mm Felt Wheel (Use 401)
|
 |
Ideal For Polishing Metals And Plastics. Using Polishing Compound No. 421 With Wheels Produces A High Luster. Use 414, 422 And 429 With Mandrel 401. Use 423 And 425 With Mandrel 402.
Technical Specification
Shank Diameter
3,2 Mm
Working Diameter
13,0 Mm
Maximu... More Info | |
Dremel 140 Piece Accessory Set (700) Dremel 140 Piece Accessory Set (700)
|
 |
700 Dremel 140pce Accessory Set This Includes An Assortment Of The Most Popular Dremel Accessories, The Included 138 Accessories Are Stored In Two Convenient Accessory Boxes That Can Be Attached On The Dremel Tool Cases (300 Series And 400 Series)the Dremel Quick Start Leaflet Illustrates The Includ... More Info | |
Dremel 15.9 mm Grinding Stone MultipackDremel 15.9 mm Grinding Stone Multipack
|
 |
... More Info | |
Dremel 165 Piece Multipurpose Accessory Set for Dremel Multi Tools 26150722JADremel 165 Piece Multipurpose Accessory Set for Dremel Multi Tools 26150722JA
|
 |
This 165 Piece Multipurpose Dremel Accessory Set Contains An Extended Collection Of Genuine Dremel Accessories (including Speedclic) From All Categories, That Offer Numerous Possibilities Of Projects And Materials That You Can Work On With Your Dremel. These Accessories Are Packed In Two High Qualit... More Info | |
Dremel 19.0 mm Wheel Shape S/Steel BrushDremel 19.0 mm Wheel Shape S/Steel Brush
|
 |
Stainless Steel Brushes Do Not Cause “after Rust” When Used On Corrosive-resistant Materials Like Pewter, Aluminum And Stainless Steel.
Technical Data
Shank Diameter
3,2 Mm
Working Diameter
19,0 Mm
Maximum Rpm
15.000 1/min... More Info | |
Dremel 19.0 mm Wheel Shape Steel BrushDremel 19.0 mm Wheel Shape Steel Brush
|
 |
Versatile Brush For Removing Rust And Corrosion, Polish Metal Surfaces, Deburr And Blend Surface Junctures Or Clean Electrical Components.
Technical Data
Shank Diameter
3,2 Mm
Working Diameter
19,0 Mm
Maximum Rpm
15.000 1/min... More Info | |
Dremel 2.4 mm Engraver MultipackDremel 2.4 mm Engraver Multipack
|
 |
Quality Cutters For Detail Engraving, Carving, Routing In Wood, Fiberglass, Plastic And Soft Metals.
Technical Data
Shank Diameter:
2,4 Mm
Working Diameter:
2.4 mm
Maximum Rpm:
35.000 1/min
No. In Pack
3pcs... More Info | |
Dremel 25.4 mm Grinding StoneDremel 25.4 mm Grinding Stone
|
 |
Use On Metals, Castings,welded Joints, Rivets And Rust. Ideal For Sharpening, Deburring And General Purpose Grinding Of Most Materials.
Technical Specification
Shank Diameter
3,2 Mm
Working Diameter
25,4 Mm
Maximum Rpm
20.000 1/min... More Info | |
Dremel 26150453JA 4.0 mm Chainsaw Sharpening Stone Dremel 26150453JA 4.0 mm Chainsaw Sharpening Stone
|
 |
Quality Cutters For 4.0 Mm Chainsaw Sharpening Stone
Technical Data
Shank Diameter:
3,2 Mm
Working Diameter:
4 Mm
Maximum Rpm:
35.000 1/min
No. In Pack
3pcs... More Info | |
Dremel 300 Series + 55 Accessories F0130300JEDremel 300 Series + 55 Accessories F0130300JE
|
 |
New Improved Lightweight 300 Design With A Specially Designed, Ergonomic Grip For Ultimate Comfortthe 300je Features Include A Flex Shaft Plus 55 Extra Accessories And A Storage Case.features A Variable Speed Setting Of 10,000 - 33,000 Rpm 125w Motor With On Board Wrench Storage And A Soft... More Info | |
Dremel 300 Series KitDremel 300 Series Kit
|
 |
Features & Benefits
New And Unique Design - Improved Ergonomics And Increased Comfort
Comfort Switches - More Comfortable When Handling And Better Control
Variable Speed 10.000–33.000 Rpm - To Match Speed To The Project At Hand
Second Attachment Interface - To Attach Dremelite
On-boar... More Info | |
Dremel 32mm, Cut Off Wheel Dremel 32mm, Cut Off Wheel
|
 |
For Slicing And Cutting In Metal,wood And Plastic. Cut-off Wheels Make It Easy To Cut Or Slot Bolts, Screws, Sheet Metal, Thin Wood And Plastic. Fiberglass Reinforced Cut-off Wheels (456, 426, 426b) Are For Tough Applications. The Cut-off Wheel Cuts Only Along Its Edge. Do Not Attempt To Sand Or Cut... More Info | |
Dremel 4000 Multitool F0134000JBDremel 4000 Multitool F0134000JB
|
 |
The New Dremel 4000 - The Most Powerful And Precise Multitool For The Most Demanding Of Craftspeople.
Features• High Power 175w Motor For High Performance• Soft Grip In All Gripping Areas For Better Handling• Full Variable Speed Control (5.000-35.000 Rpm) For Maximum Precision• Electronic Feed... More Info | |
Dremel 565 Multipurpose Cutting KitDremel 565 Multipurpose Cutting Kit
|
 |
An Intelligent Attachment Which Solves Once-and-for-all The Age Old Problem Faced By All Diy Enthusiasts And Craftsmen :"how Do You Cut Precise Holes In Sealed Surfaces?".
Features
Provides Controlled Cutting In A Variety Of Materials.easily Attaches To Your Dremel Tool.easy Depth Adjustment Up T... More Info | |
Dremel 6.4 mm, Course 60 GritDremel 6.4 mm, Course 60 Grit
|
 |
For Rough Shaping And Smoothing Wood And Fiberglass, Removing Rust From Metal Surfaces And Shaping Rubber Surfaces. Sanding Bands Are Easily Replaceable.
Technical Specification
Shank Diameter
3,2 Mm
Working Diameter
6,4 Mm
Grit
60
Maximum Rpm
35.000 1/mi... More Info | |
.
.jpg)
